Well it's been a couple months form my last Vista post and I have had to opportunity to use Vista on a daily basis, let me take a moment to tell you what you can expect.
First my PC: I have a Dell M90 Laptop with 2 gigs of ram and a Quadro FX 2500M video card. Vista rates your PC on a performance scale they call the Windows Experience Index and gives it a base score. The base score currently ranges from 1 to 5.9 and the higher the better, my PC has a score of 4.8 and I notice no hardware problems while running Vista. I will tell you this, not even to consider upgrading to Vista unless you have a newer machine no more than a year old with a quality graphics card and a least 2 gigs of ram. Otherwise your Vista experience will be less then exciting, for example my home laptop runs vista and has a base score of 2.4 it has sound problems and runs slow, but the PC was never intended to run Vista and is a couple years old.
For the most part I like Vista a lot and when I switch back to my XP machine I miss it. The general feel of Vista should be familiar to you; the layouts are very similar and for the most part functions the same. It will take you a week or two to get comfortable with the new interface and to find where they moved some setting and commands. There is one thing I turned off right away -- and I mean right away! User account control or UAC, Microsoft's way of protecting you from well yourself. You will want to disable this for your user account in the user account area.
You will find a lot of nice features in the new Vista. Too many to talk about in this blog; the best thing is to jump in and try it for yourself. If you are going to run SolidWorks, just wait for 2008 to come out (2007 has a Pre-Release 2 Vista version); I wouldn't bother with 2007 at this point. I have been using 2008 Beta 4 in Vista and it works great (you're going to love the new 2008). Soon we will be able to talk about 2008 and it will be out later this summer. Until then, if you're the cutting edge type get ready to switch to Vista, so far its great and more and more programs and drivers become available every day.
Are you using Vista 64 Bit? If so how does Solidworks 2008 run on it? I would love to switch to Vista at work, but I want 64 Bit!
Thanks
Posted by: Daniel | July 26, 2007 at 09:32 AM
I am running Vista 32 bit. SolidWorks will not support the Vista x64 operating system at this time. I'm not sure when a x64 Vista version will be available.
Posted by: Matt Luedke | July 26, 2007 at 09:46 AM
Matt,
Did you have to run Vista with Software OpenGL set or have any of the OpenGL graphics drivers made it out yet?
Best Regards,
Ricky Jordan
http://www.rickyjordan.com
Posted by: Ricky Jordan | August 03, 2007 at 11:14 AM
Ricky,
Software OpenGL in not checked - I am using the drivers for Vista from the Dell website version 6.0.6000.16386 (from RX) - I have a Quadro FX 2500M
The graphics work well some minor ghosting but the realview looks great
Posted by: Matt Luedke | August 03, 2007 at 11:40 AM
Matt,
This is good news. I'm glad to hear that OpenGL graphics drivers for Vista are starting to appear.
Now we just need to get some of them "Certified" by SolidWorks. :-)
Thanks for the update!
Best Regards,
Ricky Jordan
http://www.rickyjordan.com
Posted by: Ricky Jordan | August 10, 2007 at 09:11 PM
Posted by: raha | August 30, 2007 at 03:02 AM
Its really a great news specially for me that Open GL graphics drivers are appearing for Vista...........
http://www.electrocomputerwarehouse.com
Posted by: Cheap Computers | June 25, 2009 at 06:40 AM